Monday, March 13, 2017

Narrow crotch tear-out

     The other day, I spotted a young tree in my orchard with a wind-torn branch (photo at right). At first, all I was thinking was, "how did that happen?". But then, as I approached the tree, I immediately recognized the cause of the break--a narrow  crotch up in the center of the tree that I somehow missed during earlier pruning trips through the orchard. Just a month ago, I wrote about the importance of pruning out narrow "V" crotches to ensure that limbs don't tear out during wind storms. I guess its time to go back through the orchard again to make sure I didn't miss other narrow crotches.
    A closer look at the damage reveals that the tree basically split in two, right down the center of the tree (photo at left). At the top of the wound, you can see a bark inclusion that forms between the two halves of a narrow crotch. Under the pressure of strong winds, narrow crotch split apart and then one side ripped down the trunk for about 12 inches.
   I pruned off the bent and fractured limb and I left what was left of the central leader in place. Sometime before this tree breaks bud and grows a new crop of leaves, I'll need to place a brace up in the tree to prevent the weakened central leader from breaking over. I'll attach the brace to the tree using duct tape and keep the brace in place until the central leader grows enough wood to support itself (probably 2 years for this size tree).

Wednesday, March 8, 2017

Spreading fertilizer on the pecan grove


   With rain predicted at the end of the week, we decided to spread a little fertilizer on our pecan grove today. We spread 150 lbs. of urea (69 lbs nitrogen) and 100 lbs. potash (60 lbs. potassium) on each acre of our orchard. With this volume of fertilizer, its going to take us a little while to cover the entire Experiment Field.
   Today's fertilizer application is the first part of our regular fertilizer program. We apply fertilizer twice per year every year. During early March we spread nitrogen and potassium. Then, in October, we'll make an additional application of nitrogen. In total, we are adding 115 lbs of nitrogen and 60 lbs of potassium to our trees annually.

Thursday, March 2, 2017

Anatomy of the branch collar

   Every time I talk about pruning off low limbs from pecan trees, I end up describing how to make the proper pruning cut. Typically, I've talked about removing a limb by cutting just outside the branch collar (photo at right). Removing limb in this manner promotes quick healing, reducing the spread of wood rotting organisms. But is there an anatomical reason this pruning method works so well? Let's look under the bark to see.

    Last summer I cut a pecan sampling and carefully pealed the bark off the main stem and all the side branches (photo at left). After drying, the patterns of wood grain formation really became pronounced. You can see a raised branch collar formed by wood fibers that flow vertically around the side limb. By cutting limbs off outside this collar you don't disrupt the flow of water and nutrients from the roots to the upper portions of the tree. Cutting into the collar causes a disruption to sap flow and  creates a wound that takes much longer to heal.

Monday, February 20, 2017

Thinning more Kanza trees


      For the past six years, we have been progressively thinning a three acre block of Kanza trees. This week, we removed trees within the Kanza block in areas where adjacent trees were competing for sunlight and according to our thinning plan (photo above).  During this sixth year of thinning, we cut down 15 trees; the most we've removed in a single year. The original tree planting had 144 Kanza trees. After removing 15 trees this year, we'll be down to 96 trees in the orchard.  The first thinning will be complete when half the trees have been removed and we are down to 72 trees in the 3 acre orchard.  

    The figure at right is a map of the Kanza block as it appeared before we cut any trees this winter. Each tree is depicted by a green circle with a diameter proportional to the tree's trunk diameter. As you can see, tree growth has not been even across this orchard. Tree growth has been fastest in the northern 1/3 of the orchard.  As a result, we've thinned more trees in this area of the orchard. However, trees in the southern half of the orchard continue to grow and will require thinning eventually.


    We removed 15 trees from the Kanza Block this year.  Trees cut down are marked by black circles on the map at right. We thinned trees over the entire planting but most removed trees were located in the middle third of the orchard.
   Up to this point, I've been pleased with this progressive approach to orchard thinning. By taking out trees on an as-needed basis, we have been able to maintain good light penetration into the orchard while preserving high yields.